Ski-Doo Snowmobiles Forum banner

RS Clicker Front Shocks Fit 2015 1200 Enduro Renegade?

613 views 2 replies 3 participants last post by  SBT  
#1 ·
Does anyone know if these will fit or are they too long? They measure 20 1/2 inches eye to eye. If not, what measurement for front shocks will I need?

Thanks
 
#3 · (Edited by Moderator)
That measurement sounds a little long. I put pro 40s off a 17 rs on my 17 1200 and they were 18.5" eye to eye. Stock is around 17.5". Had mine shortened 1" and revalved. I then used my 1200 springs on them. You need to use a Dremel or die grinder and take off about a 1/16 of an inch from the id to make them fit. Not a big job to do and just touch them up with some paint after.