Ski-Doo Snowmobiles Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
4,782 Posts
Need one 40mm carb for an 83 Blizzard 9700, has choke.

OR anyone know if a later 40mm off a later Mach 1 or Formula Z etc. would work out atleast for now if I switch everything over to a bare body?

Also, if someone has the part number for that it would be helpful, trying to help out a friend.
 

·
Registered
Joined
·
387 Posts
PTO - VM 40-23

MAG - VM 40-24

Mains: PTO 330

MAG 350

NJ: 224-AA5

Pilot: 40

JN: 7DH2-3

Clip pos.: 3rd

Cutaway: 2.5

Air screw: 1 turn

Idle RPM: 1800-2000

Minimum 92 octane fuel mixed at 30:1

Got the info from page 319 of the 1983 shop manual. http://vintagesnow.com/Ski-Doo_files/1983_SM.pdf

I have never seen that number on a needle jet before. Also, I thought it was more common to have the larger main on the PTO side.
 

·
Registered
Joined
·
1,772 Posts
I have a pair of VM40's from a 1988 Plus, Complete minus Main Jets. With Chokes Tabs

Same Specs, as I have said, minus the Main Jets. I scammed them for my Summit after I deleted the HAC.

I checked in my 1980-1988 Specification Book
 
1 - 3 of 3 Posts
Top