Ski-Doo Snowmobiles Forum banner
1 - 1 of 1 Posts

·
Banned
Joined
·
1,103 Posts
Discussion Starter · #1 ·
Hi, The last time I went up north I took a look at my track tension. I noticed the clips on the track are wearing on the flat piece. It has been rubbing agaisnt something. I felt the tension of the track near the front of the sled right about where the sled ends. It is way to tight. I measured the track tension its just about right the manual says 13mm. Should I loosen the track more to prevent my clips from wearing down to the track? I think i tried loosening it to lik 1inch and it still was preety tight up against the slider
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top