Ski-Doo Snowmobiles Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
187 Posts
Discussion Starter · #1 ·
i am changing my track for the first time on a rev 800 ho. is there anything to look out for or is it pretty easy going . any info on how to do so would be great.
thanks andy
 

·
Registered
Joined
·
187 Posts
Discussion Starter · #2 ·
also one more question.right now i have a 1.25 track with 1.325 woodys in it ,with the tunnel protectors for that track.putting in 1" track with 1.2 chisels in it.will i have any problems with it hitting or will it be ok.
thanks again
 
G

·
Only thing to really remember is when you pull the cover off the drive axle for the speedo make sure you remove the pick up out of the drive axle. I got busy and forgot to remove mine and wound up breaking it as I was removing the shaft. Don't need to remove the screw in the pick up. Just pull the whole unit out. Beer tends to make you forget these things. When putting the suspension back in I found it easier to intall the front arm bolts first and then the rear ones.
 
1 - 4 of 4 Posts
Top