[Laddington]

Looking for some help to ID which clutches I have and some questions, I have 2 clutches, one off a 06 renegade 800 ptek and another supposedly off an 800h.o year unknown. The stationary sheaves have the same part number but the rest appears to be different.
The clutch with the ring gear was damaged when the jackshaft broke and clutches grinded together. Im wondering if I can use the stationary sheave and internals from the 06 and the moveable sheave from the other?
Also if anyone has recommendations on a front end bushing kit I'm all ears. Thanks!

 

[Vincent23]

Following thread

 

[David H]

Just a thought...I might install the ring gear on the good clutch. Then, take it apart and see what's inside like spring and ramps. Rebuild as necessary and run it.

As for bushings, pretty sure you can still get stockers for $2.50 a piece. Or upgrade a bit and go oilite for around $85 a set (16). Or something that will outlive you and go Mainway...something like 2 bills. Good luck.

 

[Laddington]

The "good clutch" I got at haydays for $40 and isn't threaded to accept the ring gear otherwise I would do as you said. Also it has aftermarket arms that I'm not sure of the brand.

 

[David H]

My concern with swapping out the fixed sheeve is balance. Smarter guys will have to chime in on that however.