torque specs
1 - 3 of 3 Posts
Cylinder head is 20 ft/lbs
Flywheel is 54 ft/lbs
Crankcase is 16 ft/lbs.
Don't worry too much about your head gaskets, unless you see damage to them. I have removed mine a few times and have not had any problems. If they are leaking a bit, you will see some black oil build up and leak, but it won't harm anything. Check out my project, it might answer a couple of other questions.
Brandon
Flywheel is 54 ft/lbs
Crankcase is 16 ft/lbs.
Don't worry too much about your head gaskets, unless you see damage to them. I have removed mine a few times and have not had any problems. If they are leaking a bit, you will see some black oil build up and leak, but it won't harm anything. Check out my project, it might answer a couple of other questions.
Brandon
Joined
·
1,118 Posts
bwthor, that sled looks great, good job.
1 - 3 of 3 Posts
Join the discussion
