Ski-Doo Snowmobiles Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
30 Posts
Discussion Starter · #1 ·
I replaced the stator in my tundra, but when I set my timing and started the engine, it was firing in reverse. Does that mean my timing is to advanced? Please, any suggestions!
 

·
Registered
Joined
·
4,108 Posts
Should have too much advance.So loosen your bolts holding your stator plate and turn it clockwise.And then check again with timing light to be sure lines are aligned.
 
1 - 2 of 2 Posts
Top