Ski-Doo Snowmobiles Forum banner
1 - 6 of 6 Posts

·
Registered
Joined
·
71 Posts
Discussion Starter · #1 ·
I have a 05 mxzx 800. I installed C&A pro skis with 6inch shaper bars, since the sled turns very hard, I turned the front shocks to #1 position and the front rear shock to about half way. It got a little better but still turns very hard. Does anybody have a ny suggestions to help me make this sled turn easier?
 

·
Registered
Joined
·
177 Posts
Check Camber.. If it has alot of camber take a little out of it and try that.. also check the rubber block on the skis. .>> See how much pressure it's putting on the back of the ski's. You can shave it down to take a little pressure off.. I did the camber and the front spring on the rear skid using powder pros to tune the steering effort down a little
 

·
Registered
Joined
·
8,113 Posts
its all handled wit the front skid shock and limiter straps..

if new skis, it would be a good idea to set everything back to stock and start from there.. amking one adjustment at a time till you get what you want!

FWIW - if you search you will find oodles of info on exactly your condition!
 
1 - 6 of 6 Posts
Top