I ordered up the HP tuner brp cable to give me obd connection to the sled. I had an obdlink mx scan tool, but I am guessing any generic scanner will work, that I decided to see what it can read.
Torque Pro allows you to datalog so I think this will be pretty helpful when trying to tune things.
Here is the sensor list the sled says it has.
![Image]()
Quick dashboard
![Image]()
Error code and clear
![Image]()
I tested unplugging sensors and clearing codes as well. That all works.
Torque Pro allows you to datalog so I think this will be pretty helpful when trying to tune things.
Here is the sensor list the sled says it has.
Quick dashboard
Error code and clear
I tested unplugging sensors and clearing codes as well. That all works.
