Ski-Doo Snowmobiles Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter · #1 ·
Does anyone have the procedure to check the stator for a no spark?
ie: resistance values across which wires

white
black
red
black/red stripe
 

·
Registered
Joined
·
29 Posts
Here are values I measured at 60 deg F on a good stator:

Yel to Yel= .3 ohms
White to black with red stripe=4.2 ohms
White to red= 30 ohms
White to black= infinity
Red to black with red stripe=32 ohms
Your values may be different depending on the temp and the meter you use,Hope this helps!
 

·
Registered
Joined
·
1,911 Posts
Even a stator that meters out good may still not function so only use the ohm meter for reference only, you need to do out put tests also. Todd 1-260-833-2536. we have found more cdi boxes bad or wire harness's bad than stators.
 
1 - 3 of 3 Posts
Top