Ski-Doo Snowmobiles Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
635 Posts
Discussion Starter · #1 ·
Hi all
Haven't been able to find part #s online but does anyone know I a reverse chain case from a 1984 Skandic 277/377R will fit a 93-95 tundra2

Thanks
 

·
Registered
Joined
·
7,405 Posts
Hi all
Haven't been able to find part #s online but does anyone know I a reverse chain case from a 1984 Skandic 277/377R will fit a 93-95 tundra2

Thanks
I'm sure that you could do it although it isn't going to be a bolt and go since you are dealing with 2 different chassis . The biggest issue will be a brake since the SkandicR has a caliper and disk on the outboard end of the drive axle while the Tundra has them on the secondary clutch .
 

·
Registered
Joined
·
635 Posts
Discussion Starter · #3 ·
Well I now have a tundra 2 with no skis, seat or engine, (just chasie, skid, track steering and pogos) and an 84 Skandic 377R with no engine. Do I build the Skandic and mod up the pogos onto it or do I figure out how to get the reverse onto the Tundra and build it? If the Skandic gets built the kkid from the tundra 2 goes on it.

Have to get a better look at the reverse chainsases on the weekend.
 
1 - 3 of 3 Posts
Top