Ski-Doo Snowmobiles Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
46 Posts
Discussion Starter · #1 ·
Installed a new helix and red secondary spring in the 700 last night. Setup to Bill's recommendation, B5 hole position. Measured the spring pressure once I got it back together, about 40 pounds to get it move, 34 pounds to maintain it from closing again. I think original spring pressure with stock setup was around 25 in B6 setup (white spring).

Is 34 pounds too high? Not an expert by any means when it comes to clutching, just thought 34 pounds might be a little stiff. i.e. think I have it back together right and don't want to loose top end.

Thanks
 
1 - 1 of 1 Posts
Top