Ski-Doo Snowmobiles Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
1,851 Posts
Discussion Starter · #1 ·
SDI owners, I know some 04 SDI owners had this problem and I know BRP is aware, however I thought it would have been rectified on the 05s.

Under the fuse box, just below the crossmember the rear of the fuse box sits on, the wiring can chaff on the alumunium cross member, I checked mine the other day, just because the wiring appeared to be resting on that metal, low and behold a red-white wire's insulation was nearly rubbed through, you could see a spot on the cross member from the friction and rubbing. I slid a small piece of insulation (2 x 2.5 inches) between the wiring harness and crossmember, check yours you'll see. My sled has approx. 10000kms, still runs great, love it.
 
1 - 1 of 1 Posts
Top