Ski-Doo Snowmobiles Forum banner
1 - 7 of 7 Posts

·
Registered
Joined
·
271 Posts
Discussion Starter · #1 ·
I'm planning to check my cyliners. Can I re-use my head asket? What is the torque setting for the head bolts?
 

·
Registered
Joined
·
682 Posts
They are orings and yes you can reuse them if they are in good shape. Feel for any roughness and inspect for splits or cracks. Go 18-21ft lbs on the head bolts by hand or with a smaller size torque wrench (not the big honker). #5 and #7 are shorter bolts, make sure you don't put longer ones there.
 

Attachments

·
My lifestyle determines my deathstyle.
Joined
·
2,124 Posts
BMEP said:
They are orings and yes you can reuse them if they are in good shape. Feel for any roughness and inspect for splits or cracks. Go 18-21ft lbs on the head bolts by hand or with a smaller size torque wrench (not the big honker). #5 and #7 are shorter bolts, make sure you don't put longer ones there.
[snapback]710855[/snapback]​
Like he said.
 
1 - 7 of 7 Posts
Top