Ski-Doo Snowmobiles Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
59 Posts
Discussion Starter · #1 ·
06 800 ptek
Raves won't open
Checked all hoses for cracks and also check valve coming from crank. Even tried another set of valves from another parts sled, swapped solenoid from parts sled, still no luck.

Is there any what to test if power is getting to the solenoid?
Any help is greatly appreciated
 

·
Registered
Joined
·
59 Posts
Discussion Starter · #2 ·
Forgot to mention that I had ECM reflashed and carbs bored this past summer. First time for me doing that stuff
 

·
Registered
Joined
·
13,545 Posts
I have a small test light made from an automotive peanut bulb and socket that can be used to check circuits like that. Sled on a stand with the test light hooked into the solenoid terminals, it should light up under wide open throttle when the motor gets around 7000 rpm. If it does not, try to figure out if it is missing power or grind by checking with the light grounded to the frame. Next step would be a continuity check of the wiring back to the ECM.
 
1 - 4 of 4 Posts
Top