Ski-Doo Snowmobiles Forum banner
1 - 1 of 1 Posts

·
Super Moderator
Joined
·
2,665 Posts
Discussion Starter · #1 ·
There have been several posts here and there about using the Polaris spring hanger supports for the rear springs in the XU rear skid (probably XP and XS machines too..).

BLR and some others discovered and spearheaded this upgrade. I've used them on several machines with good results, and they have the added benefit of being able to unload the spring(s) without unbolting anything. I wanted to get a couple more sets for a few more machines I have that are wearing thin on the BRP ones. Note that when the support breaks, the spring goes into the track and generally ruins the track, so prevention is a good thing here..

I couldn't easily find the part numbers for them, so now that I did I'm posting them on record.

2014 Polaris 600 Widetrack IQ and IQ Turbo LXT are two such machines that have these parts on them. You can use your own bolts if you have a supply, or buy the Poo bolts, nuts, and washers. You'll have to drill out your BRP slide rail one bolt size larger.

Overview on the WT

https://www.ronniesmailorder.com/oemparts/a/pol/52b8f4b1f870025a50010a42/suspension-rails

Overview on the LXT

https://www.ronniesmailorder.com/oemparts/a/pol/52b8f3a9f870025a50010a00/suspension-rail-mounting

Spring guide - need two of these per machine

https://www.ronniesmailorder.com/oemparts/p/polaris/5434334/guide-spring-square#

Spring guide bushing - need two of these per machine

https://www.ronniesmailorder.com/oemparts/p/polaris/5333948/spacer
 
1 - 1 of 1 Posts
Top