Ski-Doo Snowmobiles Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
414 Posts
Discussion Starter · #1 ·
changed oil lines on this 97 Formula SL How do i bleed/ prime the pump ??? Is there a screw or bolt that i have to take out or put premix in tank and leave lines off till it get to carb inlets??
 

·
Registered
Joined
·
1,635 Posts
There is a screw on the pump that bleeds the air out of the pump and the line coming from the oil tank to the pump. Once you have oil at the pump start the engine and hold the oil pump wide open until there are no air bubbles in the lines to the engine. It may take a few attemps to get all the air out of the system esp. the lines to the motor from the pump.
 

·
Registered
Joined
·
414 Posts
Discussion Starter · #3 ·
i have oil to the pump i just left line off till oil got to end of line. dont see any air, will i still have to take that screw out?? i guess i better just to be safe
 
1 - 5 of 5 Posts
Top