Ski-Doo Snowmobiles Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
Bought a 99 summit x 670 and the recoil only worked half the time. Well yesterday the recoil didn't release and it broke the pawl. I ordered a rebuild kit as well as a new recoil assembly. How does this recoil get properly reassembled. Pictures would be awesome. Gonna rebuild it to ride and replace it when the assembly gets here
 

·
Registered
Joined
·
2 Posts
Discussion Starter · #3 ·
The problem is it doesn't show the spring from the top side. I'm not sure where that little spring the disengages the pawl is supposed to go. Apparently when I put it together last time I did it wrong and it didn't release
 

·
2nd Whore in command
Joined
·
102,170 Posts
If you look close at the diagram you can see the little spring goes on top of the pawl and the little loop end goes over the nub sticking up from the pawl.

Maybe this pic will help.

z3638.jpg

Welcome to Dootak!!
 

Attachments

1 - 4 of 4 Posts
Top