Ski-Doo Snowmobiles Forum banner
1 - 9 of 9 Posts

·
Registered
Joined
·
1,580 Posts
doo_man440 said:
wtb a oil pump off a mxz 600/800 for my 440.
[snapback]268261[/snapback]​
i have a new pump from a tripple all you doo is cap off one of the fittings we have done this before..100.00 used very short time,went to premix,call me if interested 1-414-852-3534..
 

·
Registered
Joined
·
1,580 Posts
440man said:
Make sure its a series 3 engine that the pump came off. If its not, then you can't use it...
[snapback]268985[/snapback]​
this was actually ordered for the model year of 1997 but will fit many applications,check your application to be sure..
 

·
Registered
Joined
·
1,911 Posts
Tripple oil pumps have a plastic gear that bolts to the back of the pump and series three motors use a flat tang on the back they are not interchangable. You should find a pump off of a 500 or 600 twin motor they would have the proper callibration for you .
 

·
Registered
Joined
·
1,911 Posts
An 800 pump would bolt up but may have to large a flow rate for a small motor it may smoke excessively but would work.
 
1 - 9 of 9 Posts
Top