Ski-Doo Snowmobiles Forum banner
1 - 7 of 7 Posts

·
Registered
Joined
·
83 Posts
blizzardboy said:
fordsucksdrivechevy said:
i have a 1981 503 fan and i need to know the specs for the engine. any info would be greatly appreciated

[snapback]258441[/snapback]​
[snapback]261086[/snapback]​
My manual is for the 1980 model year, but here goe"s;Std bore 72.00 mm oversize72.25mm piston to wall-min0.060-max0.200 mm, head tourque; 15lbs. The manual says to do each cyl individually, in a cross pattern. hope this helps Don
 

·
Registered
Joined
·
11 Posts
Discussion Starter · #7 ·
blizzardboy said:
blizzardboy said:
fordsucksdrivechevy said:
i have a 1981 503 fan and i need to know the specs for the engine. any info would be greatly appreciated

[snapback]258441[/snapback]​
[snapback]261086[/snapback]​
My manual is for the 1980 model year, but here goe"s;Std bore 72.00 mm oversize72.25mm piston to wall-min0.060-max0.200 mm, head tourque; 15lbs. The manual says to do each cyl individually, in a cross pattern. hope this helps Don
[snapback]261110[/snapback]​
thanks don helps a lot
 
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top