Ski-Doo Snowmobiles Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
55 Posts
Discussion Starter · #1 ·
I have a 01 mxz 800 and the clickers are now on 3 and i was woundering if i put them on 4 if it would make any difference. The gearing is stock and if i had to change it to do this what would be the best to have that wouldn't take any away from bottom end and give more on top end. Thanks
 

·
Registered
Joined
·
110 Posts
800 mxz said:
I have a 01 mxz 800 and the clickers are now on 3 and i was woundering if i put them on 4 if it would make any difference. The gearing is stock and if i had to change it to do this what would be the best to have that wouldn't take any away from bottom end and give more on top end. Thanks
[snapback]713265[/snapback]​
What kind of rpm's are you pulling wide open? If you bump you clicker up one that will give you 200 more rpm's. I believe you should be pulling 8000. If your a little low then give it a try. If not, it will not help and you will lose HP.
 
1 - 3 of 3 Posts
Top