Mahler Risers

revbaron used to sell them

biggziff said:

revbaron used to sell them

Click to expand...

I have a pair of them, and they are sick. I love them. I wouldn't have any other pair of risers. I know a little while back he didn't have any. I would just pm him.

Sry don't know how high stock is. I would just get on the skidoo website and look it up.
Ryan

Stock riser on summit X is about 7 inches(180mm).

Stock I believe is 7".I have a set on my 800x that are 9.25" with a set of fly areotaper snowx bars.Its a sweet setup.I also moved the controls from the left side of the hadlebars and relocated them to inbetween the risers so I dont hit that peske RER button anymore.

either revbaron or I Dare Ya Rene!

Will these risers work with a non-X sled with aftermarket bars, or does non-x use a different steering stem connection?

If you don't have the 440x stearing stem you'll have to use a 7/8'' piece of tubing to clamp the riser to. Rox speed fx sells one that is allready pleated to ensure no slippage.

DIRKA-DIRKA said:

If you don't have the 440x stearing stem you'll have to use a 7/8'' piece of tubing to clamp the riser to. Rox speed fx sells one that is allready pleated to ensure no slippage.

Click to expand...

Parts-unlimited does as well. Don't forget to check your cables and brake line too.

Boondocker-1 said:

If you don't have the 440x stearing stem you'll have to use a 7/8'' piece of tubing to clamp the riser to. Rox speed fx sells one that is allready pleated to ensure no slippage.

Click to expand...

Parts-unlimited does as well. Don't forget to check your cables and brake line too.
[/quote]

Thanks guys