Ski-Doo Snowmobiles Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
10 Posts
Discussion Starter · #1 ·
Well I replaced the cdi and I seem to have spark but it still wont start. there is fuel and the plugs are new. each cylinder shows that it has 127 psi straight accross. Lights all light up as I pull it over , its got me stumped. any ideas out there 97 mach 1
 

·
Registered
Joined
·
608 Posts
try unhooking the kill swicth, i had a buddy with a cat that had the same problem it would seem to have spark with the plugs out, but something in the kill switch was shorting out, its worth a shot
 

·
Registered
Joined
·
2,240 Posts
Just put a cdi box on a friends 97 mach 1.Sometimes it would start and backfire,then quit.Other times it would never start.All this time it showed
good spark at the plugs.Somebody around you must have a 6,7,or 800 cdi box you can try.
 
1 - 5 of 5 Posts
Top