Ski-Doo Snowmobiles Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
21 Posts
Discussion Starter · #1 ·
Have a PDP tail light for my 05 mxz 500ss. Also had a broken microswitch which was replaced as well. Before installing the light I double-checked the microswitch was acting properly with a multimeter.. all was good. So i quickly twisted up the wires to test the LED and the light acts exactly as it should (brake is bright, running is dim)... Only issue is the brake light on the dash is on at all times... Could the LED not be creating enough resistance and therefore tricking the dash light? All is well except the dash light, any ideas whats going on?

Thanks in advance,

Rob
 
1 - 1 of 1 Posts
Top