Ski-Doo Snowmobiles Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
41 Posts
Discussion Starter · #1 ·
Has any one put j hooks on a sled with the heated hand grips. and if soo how did you do it without cutting wires? doesent seem like there is enough room to fit the j hook in.

Joe
1998 mach z 800 triple
 

·
Registered
Joined
·
1,064 Posts
i had to cut my wires and rerun them under the grips, pretty sure its the only way to keep the heat in the grips

Jim
 

·
Just the Tip!!
Joined
·
2,504 Posts
The Zx chassis i know u have to but the REV theres no interference with wires on the outside im not sure about the CK3.
 

·
Registered
Joined
·
141 Posts
Never had a problem with my old zx renegade 800. I slacked off the bolts a lot to get em in and then cranked them tight like normal. You should be fine as long as the sharp part that 'digs' into your bar when you tighten it isn't on the wires.
 

·
Registered
Joined
·
41 Posts
Discussion Starter · #5 ·
cartwrighthotel said:
Never had a problem with my old zx renegade 800. I slacked off the bolts a lot to get em in and then cranked them tight like normal. You should be fine as long as the sharp part that 'digs' into your bar when you tighten it isn't on the wires.

[snapback]267811[/snapback]​
Alright i willl try and see which option i can do. Thanks for the information
 
1 - 5 of 5 Posts
Top