Ski-Doo Snowmobiles Forum banner
1 - 8 of 8 Posts

·
Registered
Joined
·
177 Posts
Discussion Starter · #1 ·
Hello -

Has anyone installed an electric start kit on these machines? Is it fairly self explanatory or should I leave it to the pro's... With as many kids as I have, pull starting everyones machine everytime its time to go is wearing on the "fun-o-meter" of taking everyone. I ordered to electric start kits for my kids '07 550 and '06 300 ... did ski-doo make every machine e-start ready, or am I going to be drilling and tapping holes and shimming the starter to the perfect angle. If its a simple bolt-on with some wiring plugs to re-arrange ... I'm good but if it requires a tap and die kit, and an engineering degree to get the sprocket mounted and so on... I'm not messing with it.

Anyone been down this road already? Kits should be here later this week.

Any advice or experience in this task would be appreciated.
 

·
Registered
Joined
·
177 Posts
Discussion Starter · #3 ·
I'm not sure if it has one or not, I'll check tonight. Now that you say that, it seems I recall seeing that it may have one after all....

I read something about fires because of the battery location on the '06 - any suggestions there?
 

·
Registered
Joined
·
177 Posts
Discussion Starter · #6 ·
Ring gear is on the 550 - but not on the 300. I searched through your posts as you suggested, I gather you suggest either locating the metal battery box for use, or installing some sort of heat shield to prevent melting/fires. I do not have the kits in hand yet to know what box it will come with. Thanks for the advice.
 

·
Registered
Joined
·
177 Posts
Discussion Starter · #11 ·
E-Starts are done on both machines. I used heat tape on both battery boxes next to the exhaust, and yes they are both plastic boxes. The 550 astually seems like it would be more apt to melting the box with the entire cansiter staged within a close proximity as opposed to the pipe on the 300. Either way, I taped up both boxes and they work great. Life will be alot easier on me not having to pull start all the kids machines everytime we take off... that and I put new struts on my trailer which I had no idea how bad they were until I lifted the cover with the new struts on it. I remember hurting my back lifting it last winter when it had some ice frozen on top that I didn't see until I had the lid up.

Thanks for the advice on the battery boxes with regard to the potential melting.
 

·
Registered
Joined
·
177 Posts
Discussion Starter · #16 ·
just reading the thread here, guy's your talking about the same part# for the starter kits 300 and 550, looking to get just a new starter for my 06 tundra 300, starter motors are not the same from what i found in the manuals???let me know if the starters are physicaly the same, then it will enlarge my search options to get a used one.tks a lot for your replies...
I had the exact same kit arrive for both models and had no issues installing either of them.
 

·
Registered
Joined
·
177 Posts
Discussion Starter · #18 ·
Well I would hardly call this advice expertise; but when looking at starters, pay no attention to their physical appearance. If the bolt holes line up and the gear is the same size it will work. Aftermarket is just that - they try to make universal applications so that they'll fit more models in turn enhancing sales. It's not uncommon at all for a starter to have a different configuration and still be an applicable model. The starter kits I ordered were OEM and they were exactly the same and did work on both the 300 and 550. It is a different looking starter than that of a stock unit that came with electric start - again, an upgrade that skidoo likely made to make the unit more universal for various models. I'd say get the starter from Napa... take your old one with you and count the teeth on the gear and see if the bolt holes line up. I would gather while most places don't allow returns on electrical parts that if you explained the application to them if it does not work they'll probably refund your purchase if it ends up not working. I actually thought of doing the same to install e-start on these machines for my kids but once I took the shroud off and saw the simple plug in's for the e-start wiring harness... needing the batteries and battery box in addition to the starter and necessary relays made buying the kit more economical for my situation.

Hope that helps... I'd go get the Napa starter if one of these were out. You'll probably get a core refund that will make it even less expensive through Napa. Just make sure you return the core after you know it works. Don't leave it there when you buy the new one, you can always go get the core refund after you've made sure theirs works for you. If you leave it behind, they may ship it out before you come back knowing if it functioned or not.

Question....was this starter that you ordered for the 06 300 OEM, or aftermarket? Another user is suggesting that 550 starter is identical to the 300, which I disagree, can you either confirm or deny that thought? I have a bad starter on my 06 300, which i have not been able to find an aftermarket one for. The OEM is almost $400, which I refuse to pay. Two other dootalk users are suggesting that NAPA makes a 550F starter that would work on a 300f, I called my local NAPA and asked for the part number, looked at the image and the picture looks nothing like the OEM that was on my machine. Your expertise in this area would be helpful...Thanks in advance
 
1 - 8 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top