Ski-Doo Snowmobiles Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
657 Posts
so after inspection of my suspension i noticed the idler wheels are not same position from left to right side. there are two sets of holes for the (4)outer wheels and same for the two inners. one side is using the forward set of holes and other the rearward set. this seems very wrong from what ive seen. they should be same side to side i would think? they are off by about 1/2 inch side to side now if any one has a pic close up of correct mounting holes to use would be great. thanks
 

·
Registered
Joined
·
6,092 Posts
This is where they are installed from the factory. The offset pattern is done to quiet the track noise and vibration.

Bob
 
1 - 4 of 4 Posts
Top