HPG shocks

792 Views 9 Replies 6 Participants Last post by Lakelandsledder, Oct 20, 2006

Lakelandsledder

Discussion Starter · Oct 4, 2006

I have some "Tweener" built HPG shocks that were on an (2000) SC102 rear suspension. I am looking into buying a 2002 with an SC103 rear suspension. I heard rumors that one of the two shocks do not interchange. Is this true? Does anyone have measurements from an SC103 rear with HPG's ..The one's I have are as follows

REAR shock: 17 1/8 inch extended center to center. Compressed 11 1/4 inch center to center

Center Shock: 13 1/4 center to center (with spring attached)

Save

1 - 10 of 10 Posts

gravy davey

· #2 · Oct 4, 2006

Not positive but I think the rear shock is different

Save

SLEDNECK04

· #3 · Oct 4, 2006

My 02 measures 16 1/4" eye to eye with those motion whatever shocks on on the trail version. But I fit a gas 17" eye to eye on. My front measures 13". Not sure what they are closed??

See less See more

Save

Lakelandsledder

Discussion Starter · #4 · Oct 4, 2006

~~SLEDNECK04~~ said:
My 02 measures 16 1/4" eye to eye with those motion whatever shocks on on the trail version. But I fit a gas 17" eye to eye on. My front measures 13". Not sure what they are closed??

Sounds like they may work then.

Save

Lakelandsledder

Discussion Starter · #5 · Oct 4, 2006

just did some searching in the rev section and they are back and forth if they fit or not. I think the only true way would be if someone has their SC103 skid out and could measure the shocks for me.

Save

AK SloPok

· #6 · Oct 19, 2006

I have an 02 Renegade with a 136" track on it. The specs call for a 12.9" front with a 22" rear. I am having 0 luck finding a set.

Save

bengelp

· #7 · Oct 20, 2006

They'll work.

Save

mxz-convert

· #8 · Oct 20, 2006

bengelp said:
They'll work.

He's right...they will fit. Front shock is basicly the same.....rear shock will fit, but the valving is different because of the linking differences for the shock mount.

Save

bengelp

· #9 · Oct 20, 2006

mxz-convert said:
They'll work.

Save

Lakelandsledder

Discussion Starter · #10 · Oct 20, 2006

bengelp said:
They'll work.

He's right...they will fit. Front shock is basicly the same.....rear shock will fit, but the valving is different because of the linking differences for the shock mount.
[/quote]

I should say, also, that I don't think the C46 shock with the 5/8" shaft will work on the rear of a SC10-II due to shaft clearance at the upper mount. It will probably bend the shaft.
[/quote]

Tweener told me they will work. These are not the Big X package shocks. They are just HPG T/A. I don't have the skid out yet, but I did take my 2002 X skid out and the rear shock was the exact same length.

See less See more

Save

1 - 10 of 10 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.

Top Contributors this Month