Ski-Doo Snowmobiles Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
6 Posts
Discussion Starter · #1 ·
I have an 08 600rs and I cut the wires right at the handlebars for the hot start when I bought it, but recently I heard you have to cut them near the ecu for it to go into the x-country curve. So my question is am I still in the sno x curve or the cross country curve? Thanks!
 

·
Registered
Joined
·
25 Posts
But why cut the cables? you can disconnect the pin from connector,its easy, remove the wedge lock ( DEUTSCH connector) and lift stopper and pull cables! for the multiple connectro remove the speedometer

if you need to reset the TPS you must have hot start button fitted and working right

if you cut cable...the 470 OHM resistor dont work.....cut near button or near ecu is the same,but its bettere remove the pin form multiple connecctor
 
1 - 4 of 4 Posts
Top