Ski-Doo Snowmobiles Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
2,009 Posts
So when I got a hitch for my Tundra it came with the C-type Hitch which is a large diameter pin. When not in use the pin Also goes through a hole in the mount to I guess stop it from moving around. I ended up changing the hitch to the standard 1/4" hole one since the holes on my toboggan are that size.
This last week my toboggan pin was popping off from this extra piece on the mounting bracket. I want to change it back to the C-type hitch but wonder on the restrictions of the toboggan going down and the pin hitting this bracket. If I use a longer pin like from a tractor supply place I could see this being a bigger problem.
Anyone have any feed back on this? Not sure how to post pics from my phone.

RR
 

·
Registered
Joined
·
82 Posts
I took mine right off and welded up one out of flat bar and hollow rod.initially I used a piece of flat bar with holes drilled both ends and left original on,only problem was backing up as it would jackknife.
 
1 - 2 of 2 Posts
Top