Can anyone help? I just re-installed my egine on my 2008 Ski Doo TNT 500ss but need help with all the hoses. Can anyone explain where all the hose hook up too? On the back of the motor i have 4 spots to hook up hoses. One on the upper left on the back of the motor that I believe goes to the carb on the left side of the carb for the coolant line.(is this correct)? I have one spot on the back of the motor on the bottom middle for the oil pump.(I'm sure this is the main oil line from the bottom of the oil tank). There is a spot on the back of the engine in the middle above the oil pump and just to the right that has a 90 degree hose barb going to the right for a hose. What hose goes here?(does the long middle line from the coolant fill resivior go here or does the other long oil line hose off the back side of the oil tank go here)? Then on the back side of the motor on the bottom right side is a small hose coming off the engine that looks like a coolant or fule line(does this go to the right side of the carb for the coolant)? Lastly on the fule pump there is one sopt for a hose that is marked "P" (I believe that this sopt is for the long hose that comes from the top of the gas tank near the oil tank am I correct). If any one can help I would be greatful as I want to make sure all hoses are correctly connected. This 500ss was a crashed sled that was given to me very cheap and I cannot wait to get on it as it's the newest sled I have ever had. Please let me know if you can help.