I bought one of these for my Gen4 Expedition Sport. It works with the linq brackets that came on my sled. I plan on rigging it up to carry my ice fishing gear but haven't done that yet. I can squeeze a medium Plano sportsman trunk into mine as I have the largest rack. Widthwise a large ammo box from Harbor freight fits and I'll at times carry one with a sno bunje and other things to help me if I get stuck. Lots of ways to configure something like this. https://trailbreakeroutdoors.com/

Sent from my SM-A515U using Tapatalk

 

I also have an Expedition sport with the SSR rack. Have had it for 3 years now and have it mounted with the link adapters. It has held up well.

My only complaint (and it is minor) was that I had to put loctite on all the screws as some had managed to come loose (even though they provide lock washers).

I am thinking of making an additional box to fit in front of my auger's powerhead and my seat as there is still a fair bit of room that can be taken advantage of.

Overall its a great product.

 

Thanks for sharing guys. With all of my forum/web searches I hadn't come across the SSR rack before. I had something similar on an old sled. It seemed as though it was a not great for most things but works for everything kinda rack. I'm not ice fishing so I really have no need for the auger holder. Looking for a box for a chainsaw, handsaw, and other general use items.

 

I think there is a thread on here discussing mounting an action packer using linq mounts. Good luck in your search.

Sent from my SM-A515U using Tapatalk

 

Which SSR model did you buy for your 2021 Ski Doo G4 Expedition Sport . Thanks.

 

I have the SSR 150. You will need 4 line fasteners to complete the installation.

https://shop.ski-doo.com/us/en/715001707-linq-fastener.html?gclid=EAIaIQobChMIquzYktXk7gIVJgOzAB0tGwpiEAQYASABEgLTp_D_BwE&gclsrc=aw.ds

Sent from my SM-A515U using Tapatalk

 

I meant linq fasteners. Darn spell check.

Sent from my SM-A515U using Tapatalk

 

Thank You.

 

I also bought the SSR 150. Added the axe holder, and the 8" ice auger holder from Trailbreaker Outdoors.

Looks like they have a chainsaw holder now as well. https://trailbreakeroutdoors.com/product/ssr-chainsaw-holder/

Than I ordered 4 link fasteners from Ski-Doo.

 

How did you mount your gun rack on the SSR? I messaged them about that rack with a gun mount and they said they were not designed for one and didn’t have one in the works. Said they had a few designs but were not a fan of using the kolpin hard cases.

 

How did you mount your gun rack on the SSR? I messaged them about that rack with a gun mount and they said they were not designed for one and didn't have one in the works. Said they had a few designs but were not a fan of using the kolpin hard cases.

Sorry if the picture was misleading.

The gun is not mounted on my sled. If you look closely you will see an extra set of skis at the front of the sled. There is a second sled behind mine.

 

I thought you just really liked it way up in the air. Was thinking you must be one tall sob to still reach that thing when you step off the sled in powder.

 

Ski Doo now offers a rear rack for 2022 as an accessory. Part # 860202223 for my 2021 Tundra LT $199.99 list price.

It is a little lower than the previous factory racks but still looks like it will work well.

You can even put it on a Summit SP in the "Build & Price"

 

Ski Doo now offers a rear rack for 2022 as an accessory. Part # 860202223 for my 2021 Tundra LT $199.99 list price.

It is a little lower than the previous factory racks but still looks like it will work well.

You can even put it on a Summit SP in the "Build & Price"

A quick web search does show me this rack on skidoo.com.. Any pictures of info of how this rack looks when added to a sled? Your right it doesn't look very tall.

I was considering the 90L storage box from skidoo, but it's a little bigger than I'd like and it's over $400. Add another $100-200 to get a saw mounted up to it.

As of right now I've ordered a linq cargo rack plate from Whiteout technologies, linq brackets, a 24 gallon Action Packer, and a simple chainsaw tray that I plan to put on top of box. I'm hoping this achieves my goal of staying light weight, easy to take on/off, and carry a saw. I'll be sure to share what I came up with once I receive all the parts.

 

So I finally got all the parts in that I ordered. Here is a video of what I came up with. My goal was to stay light weight, carry a chainsaw when needed, shovel, hand saws, etc. I like it and think it'll work out well. Check it out and let me know what you think.

 

Thanks for the video. Works so much better than pictures sometimes. I've been trying to figure out how I'm gonna mount my ice auger. I'm thinking that plate and box you have and built some supports up the side of the box for strength and put my auger carrier on the top of the supports.