Ski-Doo Snowmobiles Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
157 Posts
Discussion Starter · #1 ·
I have an 03 rev 800 . Front sway bar seems real sloppy. Ive tightend the nuts on them and the blocks from the sway bar still move. The sled has tons of body roll becouse of that. I noticed that on the 06s they use a different sway bar . To me it looks like a better design. Is there something i can do to mine? Or should i buy an 06 and try that set up.
 

·
Registered
Joined
·
537 Posts
I have a 05 gade and noticed that my sway bar was making a rattling noise. Upon checking it out discovered that both of the plastic sleeves that cover the ends of the sway bar were gone. Picked up a new set for $15 at my local dealer, he told me that it is not uncommon to have them break or fall off. they call these sleeves sway bar ends.
 
1 - 2 of 2 Posts
Top