Ski-Doo Snowmobiles Forum banner
1 - 6 of 6 Posts

·
Registered
Joined
·
1,911 Posts
I am using Ducks floater kit on both my Revs with good results. Ducks kit allows for about 1/8" or so movement on the secondary axle. I used anti-seize grease on the spindle so the movement is greased real nice (I can't imagine it binding under load like some suggest). Belt dust is reduced in my case and I'm a believer that the kit works very well (so far).

For $35, it's not going to break your bank for this mod. Duck does a real good job!!


Here's more info !!
 

·
Registered
Joined
·
87 Posts
Discussion Starter · #6 ·
ttabs said:
I am using Ducks floater kit on both my Revs with good results. Ducks kit allows for about 1/8" or so movement on the secondary axle. I used anti-seize grease on the spindle so the movement is greased real nice (I can't imagine it binding under load like some suggest). Belt dust is reduced in my case and I'm a believer that the kit works very well (so far).

For $35, it's not going to break your bank for this mod. Duck does a real good job!!


Here's more info !!
[snapback]705792[/snapback]​
thanks kit is ordered ill post results
 
1 - 6 of 6 Posts
Top