Ski-Doo Snowmobiles Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
13 Posts
Discussion Starter · #1 ·
Yes I have a 00 MXz 700 and i have the track 15x121x1.5 stagered and i would like the best clutching/gearing set up for total bottem end and mid range, i also have reed spacers and Carbon Tech reed's, and ufo's are ordered.
 

·
Auto Tech
Joined
·
1,095 Posts
I have 24/44 gearing with my sled with a 1.5" track. It pulls hard but the motor isn't stock. A good clutch setup for this sled I found was a 50/47 helix in the 5B position for the stock spring. I had to put the clickers on 5, to get the rpms back where they should be. But it pulled real hard, that was when my sled only had reeds and a head mod. I would try that setup and see how it is, I don't think you'll be disappointed.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top