Ski-Doo Snowmobiles Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
12 Posts
Discussion Starter · #1 ·
so i installed a new oil filter in my 04 rev summit 800 and i keep bleeding the oil pump with the 8mm nut located at the front of the pump....there is a lil bit of air that will not come out of the filter...i premixed the gas at like a 50:1 just in case but dont want to run the sled with that air bubble there.....any suggestions.

thanks
 

·
Registered
Joined
·
2,803 Posts
Just take a long screw driver and push the pump arm to full open position for a moment or two while she idles, that'll bleed it real quick. Be careful with that bleed screw, it's a self tapping screw and is real easy to pull the threads out of the pump body
 

·
Registered
Joined
·
12 Posts
thanks man, just nervous when it comes to oil injection..so i just tried to run the oil pump while idling and the bubble is still there...tried like 3 different times and tipped the sled and everything...stumped
 
1 - 3 of 3 Posts
Top