[RevMatt]

I changed the belt on my 05 600HO the other day so i could have both of my belts broken in, but since I put the new one on the belt is squealing in idle, from the spinning of the clutch. I can tell that it is rubbing on the side of the belt facing inside the sled but im not sure what i did wrong since the belts on Revs are so darn simple to change...somehow i managed to screw it up tho

 

[dynofox]

Your belt deflection is too tight with the new belt.

 

[RevMatt]

Your belt deflection is too tight with the new belt.

[snapback]685970[/snapback]​

how can i fix that?

 

[Renegade Scotty]

adjsut the secondary. loosen the 3 blots on secondary and turn it counter clockwise. then tighten all 3 again. belt should be 1-16 to 1/8 above pulley

 

[Julius Seizure]

how can i fix that?

[snapback]685985[/snapback]​

http://www.dootalk.com/forums/index.php?sh...ndpost&p=200414

 

[Sledslapper]

adjsut the secondary. loosen the 3 blots on secondary and turn it counter clockwise. then tighten all 3 again. belt should be 1-16 to 1/8 above pulley

[snapback]685999[/snapback]​

Turn what clockwise...the center bolt? the clutch itself??

 

[wecker20]

The clutch itself. Read the link that was posted by Julius Seizure. That should be all the info. you'll need.