2" riser block available at royal Distributing, costs about $25, u can use stock cables and windshield. Windshield will sit a little high but will work. Worked great for me last yearSki-Doo02 said:
Bar riser
1 - 12 of 12 Posts
I looked at www.denniskirk.com and found one for 2004 rev. only thing is... Do i need something else to make it fit or do I just get the square block and it will fit good? let me know pleasematt_west9 said:
Should work , all mine was is the block and 4 bolts, need longer ones than stock, It takes about 10 min to install and looks almost stockSki-Doo02 said:I looked at www.denniskirk.com and found one for 2004 rev. only thing is... Do i need something else to make it fit or do I just get the square block and it will fit good? let me know pleasematt_west9 said:
![]()
[snapback]912147[/snapback]
Alright, one more thing... Did you have to put a pivot on? or did it just fit right on? I can't find just a 2" on Royaldistributing.com as just the block. Only a pivot 2". Thanks for your help man.matt_west9 said:Should work , all mine was is the block and 4 bolts, need longer ones than stock, It takes about 10 min to install and looks almost stockSki-Doo02 said:I looked at www.denniskirk.com and found one for 2004 rev. only thing is... Do i need something else to make it fit or do I just get the square block and it will fit good? let me know pleasematt_west9 said:
![]()
[snapback]912147[/snapback]
[snapback]912152[/snapback]
matt_west9 - If you didnt change your windshield to a fixed one do you now have a 2" gap for cold air to come through?matt_west9 said:
Sledneck9 has good suggestions with "pivot riser from roxspeedfx, or a sportech articulating bar riser (ABR), or a powermadd block riser with a pivoting adjuster"
Rox has a kit with the pivot riser, bar pad, and hand guards with billet mounts that attach to the stock mobile windshield mounts.
Yes there was a gap but no wind would come through, you couldn't really see it if u wern't looking, it was where the bottom of the shield rests on the "pod" I dont know what else to call that piece. It does look a bit funny but it's cheap, I ended up rolling the thing so I just got an 06 shield instead of the 04.SHOWTZ said:matt_west9 - If you didnt change your windshield to a fixed one do you now have a 2" gap for cold air to come through?matt_west9 said:
Sledneck9 has good suggestions with "pivot riser from roxspeedfx, or a sportech articulating bar riser (ABR), or a powermadd block riser with a pivoting adjuster"
Rox has a kit with the pivot riser, bar pad, and hand guards with billet mounts that attach to the stock mobile windshield mounts.
![]()
[snapback]912176[/snapback]
What's the deal with the Pivot adapter? I don't have one and mine works fine.
I used the RSR riser kit it's on page 234, $19.95Ski-Doo02 said:Alright, one more thing... Did you have to put a pivot on? or did it just fit right on? I can't find just a 2" on Royaldistributing.com as just the block. Only a pivot 2". Thanks for your help man.matt_west9 said:Should work , all mine was is the block and 4 bolts, need longer ones than stock, It takes about 10 min to install and looks almost stockSki-Doo02 said:I looked at www.denniskirk.com and found one for 2004 rev. only thing is... Do i need something else to make it fit or do I just get the square block and it will fit good? let me know pleasematt_west9 said:
![]()
[snapback]912147[/snapback]
[snapback]912152[/snapback]
[snapback]912157[/snapback]
The PowerMadd pivot is a nice item that works well. I have one on my 01 ZX with a 6" riser, 02 440x bars and Acerbis handguards. The only thing I had to change was the brake line ( to short ), but that was because I went with a 6" riser.
![]()
Here is one on a friend's sled. The risers are made by me along with the adapter bar. The adapter bar in the pic is not mine. He made that himself.
Attachments
Here it is with a cover that he made.
Attachments
1 - 12 of 12 Posts
