Ski-Doo Snowmobiles Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
4,343 Posts
Discussion Starter · #1 ·
Ordered up some new plug wire and caps for the 95 MX. The manual lists instructions for replacing the caps but not the wires.

Can those wires be removed and replaced at the coil? Thanks.
 

·
Registered
Joined
·
4,777 Posts
They push in and there are some pretty fragile little clips that hold them in . Careful not to break them or you would need to use some Goop or adhesive to keep them in.

Sent from my iPhone using Tapatalk
 

·
Registered
Joined
·
4,343 Posts
Discussion Starter · #3 ·
They push in and there are some pretty fragile little clips that hold them in . Careful not to break them or you would need to use some Goop or adhesive to keep them in.

Sent from my iPhone using Tapatalk
Ha! You are so right. Pulled the coil around noon and destroyed that plastic clip 5 minutes later. Skinny little 25 year old plastic piece of garbage. ShoeGoo or similar will be better anyway. New caps, wires and a cleaned up coil should get me going again.

Thanks for the spot-on input. Cheers!
 
1 - 5 of 5 Posts
Top