Photo of my sled...

 

That track is a tough one to find , I cut an Everest track ( 124 X 16.5 ) down to fit on a table saw .

 

Kimpex makes a brand new track for that machine. Part # 04-534. I wouldn't imagine you have a Royal Distributing close by in the Yukon. Here's a store in Alberta that would ship one to you.

http://www.motionmotorsports.com/kimpex-durado-tracks-detail.htm?productid=9633466

If you're in the market for a used track, many online catalogues can serve as a parts interchange manual which will give you a variety of parts sleds to keep an eye out for. I have a 124 inch on my 91 safari LXE parts sled for example, not sure of track pitch but may work. Not for sale though. Best of luck in your search.

 

My son was a shipper for Royal Distributing (Guelph Ont) a couple years ago. He said he sent tracks up north, Iqualuit, then.
So it is worth asking, if you find they have the correct track.

 

I've tried Royal Distributing,
they are my go to for parts, but..
They don't seem to carry anything for the tundra tracks older than 2012 models...

Anyone ever try to modify a tundra short track (124) to fit something like a 121 inch track?

 

I've tried Royal Distributing,
they are my go to for parts, but..
They don't seem to carry anything for the tundra tracks older than 2012 models...

Anyone ever try to modify a tundra short track (124) to fit something like a 121 inch track?

It has been done , the only hurdle is changing the drive sprockets to 2.52 pitch for the 121 track , the bonus is that you can then use a deeper lug track . A search of the Tundra FAQs should yield a couple of similar swaps .