Ski-Doo Snowmobiles Forum banner
1 - 7 of 7 Posts

·
Registered
Joined
·
231 Posts
Discussion Starter · #1 ·
got 98 mach z with 03 motor crankshop trail pipes,v force and cut head ,was wondering what kind of clutching you guys are running for top end,im running 286 ,18 pins,red primary and straight 50 helix and advice would be helpful thanks chris
 

·
Registered
Joined
·
168 Posts
Run a green white spring, about 19 grams of pin weight clicker 3. What is your secondary set at? Should be around 19 to 20 pounds.
 

·
Registered
Joined
·
816 Posts
chris1000 said:
got 98 mach z with 03 motor crankshop trail pipes,v force and cut head ,was wondering what kind of clutching you guys are running for top end,im running 286 ,18 pins,red primary and straight 50 helix and advice would be helpful thanks chris
[snapback]272170[/snapback]​
i used to run 280 ramps , blue spring , 19 gram pins , and a 54/48 cam around 18lbs , worked good for me
 
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top