Ski-Doo Snowmobiles Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
194 Posts
Discussion Starter · #1 ·
Would 48 studs (every 2nd bar) on GSX 550F be ok or would this create uneven pull and be tuff on the track ? (all middle)
Also any thoughts about not using tunnel protectors since no heat exchangers ?

Thought 96 might rob the little HP available.
 

·
Registered
Joined
·
1,019 Posts
IT'S A LOT OF WORK ON THE FANS BUT PUT THE TUNNEL PROTECTORS IN; THERE MAY NOT BE A HEAT EXCHANGER BUT THERE IS REALLY THIN TUNNEL SKIN AND THEN A GASTANK..... 48 DOESN'T SOUND LIKE IT IS EVEN WORTHWHILE, I WOULD PUT IN 96
 

·
Registered
Joined
·
142 Posts
For sure put in the tunnel protectors. 72 7mm studs is an option. The 7mm are a little lighter. You can also use plastic stud backers.
 

·
Just Killin' Time Till Summer
Joined
·
1,258 Posts
Tunnel protectors for shure
72 min but for the little extra I would put 96
I am going to stud my wifes and daughters
wifes 550 is going to get 96
daughters 380 will get 72
 
1 - 5 of 5 Posts
Top