Ski-Doo Snowmobiles Forum banner
1 - 6 of 6 Posts

·
Registered
Joined
·
33 Posts
Discussion Starter · #1 ·
the 440x center spring is a 2 pce unit with a spacer..the 800 center CAN use the spring, but the spacer from the 440x is short..does anyone know the dimensions for this spacer...and also how one might be had for cheap? Has anyone fabricated one out of ???? Thanks all

Cheers!
 

·
Registered
Joined
·
3,407 Posts
the race sled springs are a 210 275 the small one is the 210 part# 503190296 and the spring you want is a 275 but the height is correct and its a 503189990
You still need the spacer
 

·
Registered
Joined
·
33 Posts
Discussion Starter · #3 ·
skippydoo said:
the race sled springs are a 210 275 the small one is the 210 part# 503190296 and the spring you want is a 275 but the height is correct and its a 503189990
You still need the spacer
[snapback]273071[/snapback]​
So, the height is the same as the 440x..someone on here mentioned the 440x springs were shorter for the center skid..about 2" shorter (approx)..but that is not the case, correct? Right on, that just made that job easier!!!

Cheers
 

·
Registered
Joined
·
3,407 Posts
_mxz_REV said:
skippydoo said:
the race sled springs are a 210 275 the small one is the 210 part# 503190296 and the spring you want is a 275 but the height is correct and its a 503189990
You still need the spacer
[snapback]273071[/snapback]​
So, the height is the same as the 440x..someone on here mentioned the 440x springs were shorter for the center skid..about 2" shorter (approx)..but that is not the case, correct? Right on, that just made that job easier!!!

Cheers

[snapback]273077[/snapback]​
order the springs I posted and the height is correct. if you order the race sled spring it is shorter and wont work. The small spring i posted is off the race sled and the other is the same rate just the correct height for your sled
 

·
Registered
Joined
·
33 Posts
Discussion Starter · #5 ·
skippydoo said:
_mxz_REV said:
skippydoo said:
the race sled springs are a 210 275 the small one is the 210 part# 503190296 and the spring you want is a 275 but the height is correct and its a 503189990
You still need the spacer
[snapback]273071[/snapback]​
So, the height is the same as the 440x..someone on here mentioned the 440x springs were shorter for the center skid..about 2" shorter (approx)..but that is not the case, correct? Right on, that just made that job easier!!!

Cheers

[snapback]273077[/snapback]​
order the springs I posted and the height is correct. if you order the race sled spring it is shorter and wont work. The small spring i posted is off the race sled and the other is the same rate just the correct height for your sled
[snapback]273102[/snapback]​
thanks!!
 

·
Registered
Joined
·
23 Posts
a friend and I had 2 1/2 spacers made out of delrin we put it above the smaller spring againt the collar with a smaller diameter to fit inside the small spring and a notch for the positioning tab
 
1 - 6 of 6 Posts
Top