Ski-Doo Snowmobiles Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
2,277 Posts
Awesome, thanks a ton Chuck! Can somebody confirm in this diagram - is #11 the piece of coolant hose needed to wrap around the oil tank? (Diagram is for an '03 600ho)
 

·
Registered
Joined
·
2,277 Posts
I took this pic a while ago, hope it helps. The vent line goes nowhere really, I just pointed it somewhere out of the way.

 

·
Registered
Joined
·
2,277 Posts
On a 03 is it necessary to disconnect the octane switch with HC domes, or do i just put the switch to 91 and let it? Or do I cut & cap off the wires to the switch and install the LC domes??? RIGHT now I have the switch connected and have LC domes in,switch to 91.....is that correct?
Nope, if you have the LC domes in it you need to unplug the switch (or put the switch to the 100 setting). You'll find out in a hurry that it will hardly run on the 91 setting.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top