Ski-Doo Snowmobiles Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
30,547 Posts
Raise the rear to allow any air pocket to reach the rear of the heat exchanger, then raise the front to allow the air pocket to reach the coolant bottle. Whatever sequence is used - front to back or back to front - after a couple of times any significant air pocket should have dissipated into the coolant bottle. Air is constantly entering the cooling system and being purged while riding.

Sorry, I meant to raise the front and tilt the sled like mxzx700trygstadmod mentioned a few posts further to fill the heat exchangers.
 
1 - 2 of 2 Posts
Top