Ski-Doo Snowmobiles Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
17 Posts
Hey guys, I have a 2013 Summit Sport 600 with just over 10,000kms, I looked through my operator's manual and noticed I'm due for a injection oil filter & coolant replacement. I never done any of those on a snowmobile before and unsure where to look for the oil filter, I do have an idea on how to flush and replace coolant but not sure exactly where to flush everything out.

I plan on maybe getting Prestone 50/50 mix or Evans waterless coolant, also anyone knows how much coolant I would need to fill it up? Thanks all

1.Skidoo ManualYearsOilFilter.PNG
 

Attachments

·
Administrator
Joined
·
8,820 Posts
Filter will have to come from a dealer. No after market I know of...

Best way to flush coolant is take bottom hose off in front of motor. Replace and lift front of sled. Fill run and check. With front up will let air out of exchanger...
 

·
Registered
Joined
·
1,406 Posts
I could be wrong, but I don't think very many people change the oil filter. I changed one years ago on my 97 mxz and it seemed like a waste of time, as it was just a screen and the old one looked fine. Yours looks like it might go in the bottom of the tank instead of in the oil feed line.
 

Attachments

1 - 4 of 4 Posts
Top