Ski-Doo Snowmobiles Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
45 Posts
Probably only 3 inches, maybe 4 if you re-route your lines to try n pick up some more slack.. Although I don't know much about the rev chassis lol.. What I did was just get as much slack as I possibly could then cut a few different size 2x4s from 2-6 inches, used those as a reference and picked the most reasonable height before I bought anything.
 

·
Registered
Joined
·
744 Posts
3 inch riser with stock handlebars, 8 inch with aftermarket flat handlebars. I had a 3 inch block riser with my stock bars and switched to a 6 inch riser with flat bars on my 05 mxz 800ho.

Also checkout the faq's on the rev section, tons of info on risers and bars on there.

Sent from my iPhone using Tapatalk
 
1 - 3 of 3 Posts
Top