Ski-Doo Snowmobiles Forum banner
1 - 6 of 6 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter · #1 ·
guides on inside of track are contacting the coil of the torsion spring.. looks like plastic idlers are too small ...how can this be?
 

·
Registered
Joined
·
1,694 Posts
did the rubber come off of the wheels? this is somewhat common. check it out.
 

·
Registered
Joined
·
3 Posts
Discussion Starter · #3 ·
mikes99ss said:
did the rubber come off of the wheels? this is somewhat common. check it out.
[snapback]733832[/snapback]​
no these idlers dont appear to have ever had rubber, they are all plastic. I also checked specs for that idler and the diamiter is within 2 mm of new. These are the wheels that attach next to the spring on the same arm.
 

·
Registered
Joined
·
1,489 Posts
are the bearings in the wheel ok ?
plastic bushings in springs might be gone
pushing the spring higher

pics could help
 

·
Registered
Joined
·
3 Posts
Discussion Starter · #6 ·
ih302 said:
Better drop the rear part of the skid to inspect. Sounds like the bearings are gone or something.
[snapback]734483[/snapback]​
thanks for the ideas i will check it out
 
1 - 6 of 6 Posts
Top