Ski-Doo Snowmobiles Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
94 Posts
Discussion Starter · #1 ·
Hey guys any of you port your 1000 sdi. just wondering if any of you out there got your cyls ported. or if any of you do it yourself. and how it worked after. Thanks guys, Devin
 

·
Registered
Joined
·
413 Posts
RACER XXX said:
Hey guys any of you port your 1000 sdi. just wondering if any of you out there got your cyls ported. or if any of you do it yourself. and how it worked after. Thanks guys, Devin

[snapback]738011[/snapback]​
I ported my own it has crank shop pipes it works great went to a 800 foot radar run and ran 108mph and that was the same speed the crank shop sled was running. I live in northen vt so im at the same runs the big boys are at.
larry the owner of the crank shop came over and asked me if i geared it down
for the run. they had gear down . also best run in 1000 feet 114mph all stock
gearing
 

·
Registered
Joined
·
437 Posts
RACER XXX said:
Hey guys any of you port your 1000 sdi. just wondering if any of you out there got your cyls ported. or if any of you do it yourself. and how it worked after. Thanks guys, Devin

[snapback]738011[/snapback]​
Had mine done by a bud Mark Herek he has done alot of Mich. race and trail sleds.It rips, big improvement over stock.Tried a Bikeman big bore but squeeked it out in deep snow,wish I had my Digatron but it was on backorder
.Well back to my Herek ported stock cylinders
Feel free to call him (313)378-8468
 

Attachments

1 - 3 of 3 Posts
Top