Ski-Doo Snowmobiles Forum banner
1 - 10 of 10 Posts

·
Registered
Joined
·
3,501 Posts
sledlover said:
I bought some rebuildable HPGs for my 04 and want to make sure they are valved correctly. Does anyone have the specs or know where to get them?

Thanks
[snapback]309144[/snapback]​
Post the part# of the shocks and I will look them up tonight. Part # is on the shock example 503189163
 

·
Registered
Joined
·
1,032 Posts
The shocks I bought off ebay are what Deycore is selling, leftovers from BRP. The fronts are 505070910, mt is 503189078, rt is 503190007. I rebuild my own shocks and would like to have the same valving as the 04/05 X models shocks which I don't have a part number for. Thanks for any help.
 

·
Registered
Joined
·
237 Posts
sledlover said:
The shocks I bought off ebay are what Deycore is selling, leftovers from BRP. The fronts are 505070910
[snapback]310326[/snapback]​
Does anyone know what the original application of the part #505070910 front shocks were? I have tried figuring it out using the online microfiche and I am running out of guesses and patience.

Can anyone look up the application by part #?

Thanks
 

·
Registered
Joined
·
453 Posts
63ssrev said:
sledlover said:
The shocks I bought off ebay are what Deycore is selling, leftovers from BRP. The fronts are 505070910
[snapback]310326[/snapback]​
Does anyone know what the original application of the part #505070910 front shocks were? I have tried figuring it out using the online microfiche and I am running out of guesses and patience.

Can anyone look up the application by part #?

Thanks
[snapback]826667[/snapback]​
It seem to come from a 2002 Rev, probably the race sled as the consumer sled didn't exist in 2002... try it on the BRP site in advance search...

Try this clicky
 

·
Registered
Joined
·
657 Posts
Call Goodwin Performance tell em what you got, what you want, and they'll send it to ya. we use on our rebuilds, when a customer wants a custom setup. we've never heard a complaint yet. Expect to answer some questions about your ride and what you want..
 

·
Registered
Joined
·
111 Posts
The shocks I bought off ebay are what Deycore is selling, leftovers from BRP. The fronts are 505070910, mt is 503189078, rt is 503190007. I rebuild my own shocks and would like to have the same valving as the 04/05 X models shocks which I don't have a part number for. Thanks for any help.
Did you end up using these shocks? How did they work out?

I bought the same set from Deycore and never used them. The original applications listed on the Doo website are a bit unusual. Non-Rev for both of the back ones, and ltd build 2002 Reve for the fronts.

I'm planning to sell them and I want to make sure they actually fit your Rev.
 
1 - 10 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top